Boardroom acoustic treatment · Windsor-Essex
Boardroom acoustic treatment in Windsor, so the people on your call stop asking you to repeat yourself.
Glass walls, a long table and a hard ceiling make a boardroom ring. The people on Teams or Zoom hear that ring under every word. I measure the echo, design custom panels built in Canada, install them after hours and re-measure to show the change.
The numbers
Glass boardrooms often ring for 0.8 to 1.2 seconds, and a meeting room works best near 0.6
Echo time (RT60) is how many seconds a sound takes to fade away. When it runs long, each word is still in the air when the next one starts. The mic sends that blur to everyone on the call.
The target echo time for a meeting room. The ideal is about 0.6 seconds.
Source: Commercial Acoustics, Reverberation Time for Different Rooms
What glass-walled video-conference rooms often measure.
Source: Commercial Acoustics, Reverberation Time for Different Rooms. Targets are read at speech frequencies (500 to 1,000 Hz) in an empty room.
Microsoft's own room guidance
Microsoft says to treat at least two walls in a Teams room
"At least two walls in a room of this type should be acoustically treated to prevent echo and ambient noise issues during meetings."
"Poor acoustics can lead to echo, reverberation, and reduced speech intelligibility, thereby impacting meeting quality."
Source: Microsoft Learn, Meeting room guidance for Teams
In a glass boardroom, some of those walls are glass. So the panels go where they can hang: the solid walls and the ceiling. The ceiling is usually the largest hard surface, so I plan it first.
How it works
Boardroom acoustic treatment in six steps, with the echo measured before and after
Consult
A free 15-minute call about the room, the calls and what people hear on the other end.
Measure
I mark mic and speaker spots, then measure the echo with Room EQ Wizard and a calibrated mic. The Sound Assessment is $495 for a business, credited to your project if you sign within 30 days.
Render
You see a concept render of your boardroom with the panels in place. You approve the look before anything is built.
Fabricate
The target echo time sets how many square feet of panel the room needs. Every panel is fabricated in Canada, sized for your walls.
Install
I install after hours or on your closed day. The room is cleaned up before your team is back.
Prove
I re-measure from the same marked spots and give you the before and after graph. You also get a 15-second clap and voice clip, recorded from the same phone spot before and after.
Want a rough number first? Try the acoustic panel calculator. The same six steps work for restaurant dining rooms and home studios.
Design
Panels in your brand colours, on the wall your clients see
The people on your call see the wall behind you. Your panels can be wrapped in fabric that matches your brand colours, so the acoustic wall looks like it was planned with the office.
You pick the colours and fabrics in the render, before anything is made.
Install and your lease
Installed after hours, with a mounting plan your landlord can see first
- I install after your office closes, or on a day it is closed, so the boardroom stays free for meetings during your work day.
- During the assessment I check what your walls and ceiling are made of. The mounting plan goes into your proposal.
- If you lease, tell me on the consult. You can share the mounting plan with your landlord before anything goes up.
Questions
What office managers ask before booking
Will it make our boardroom look like a recording studio?
You see a concept render first, in your colours and fabrics. Nothing gets built until you approve the look.
How do we know it will work?
I measure the echo time before I start and write the target into your proposal. After install, I re-measure from the same marked spots so you can see the result.
How many panels does a boardroom need?
The room's size and its current echo time decide it. The acoustic panel calculator gives a rough estimate, and the Sound Assessment gives the real number.
Will panels stop people outside the room from hearing us?
Panels absorb echo inside the room. They do not block sound from passing through the walls or glass to the next room.
What about fire inspections?
For businesses, I document the fire rating of the panel core and fabric, keep panels out of exits, and plan around sprinkler heads, alarms and exit signs. Ceiling panels in a sprinklered space wait for a licensed sprinkler contractor's review. Your building and fire officials have the final say.
Where do you work?
Across Windsor-Essex: Windsor, Tecumseh, LaSalle, Lakeshore, Amherstburg, Essex, Kingsville and Leamington. I measure every room myself.
"Our AV vendor says a better mic will fix it"
A better mic hears the echo too
A mic picks up everything in the room, including the ring off the glass. A sharper mic sends that ring to the call more clearly. Microsoft's Teams room guidance asks for at least two treated walls to prevent echo.
| Question | A new mic | Panels |
|---|---|---|
| What it changes | How the room's sound gets picked up | How long the room's echo lasts |
| What happens to the echo | The mic hears it and sends it to the call | The panels soak up the reflections, so less echo reaches the mic |
| How you can check it | Listen on the next call | Echo time and a clap and voice clip, before and after, from the same spots |
Keep your AV vendor and your gear. With less echo in the room, the mic you have now has less ring to pick up.
Find out how long your boardroom rings
In 15 minutes, I'll ask about the room, your calls and what people hear on the other end. You'll know if a Sound Assessment makes sense.
